Sensors & Modules

MX1508 DC Motor Driver Module DC 2V-10V 1.5A 2-Way PWM Speed Dual H-Bridge Stepper Motor Driver L298NDescription:motor drive module is ideal for use in battery-powered smart car, toy cars, robots. Supply voltage 2V ~ 10V, can drive two DC motors or a 4-wire 2-phase stepper motors ,can achieve forwa..

The 15A 400W MOSFET PWM Module (often labeled as the XY-MOS driver board) is a high-power electronic switch designed to control DC loads—such as motors, LED strips, solenoids, and heating elements—using low-voltage control signals from microcontrollers like Arduino, ESP32, or Raspberry Pi.Key Techni..

Product parameters:Size: 33.4 * 25.6MMVoltage: 3.3V, 5VPort: the digital quantity levelThe output load voltage: 0 to 24VThe output load current: < 5A (more than 1A need to add heat sink)Platform:  MCU, ARM,The product features:Using original IRF520 power MOS tube, can adjust PWM outputCan l..

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

Description:This OLED display module is small, only 0.96″ diagonal, it is made of 128×64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.It works without backlight, that is, in a dark environment OLED display is higher compared to that of LCD display you wi..

DescriptionParameters:1.Item: ID keychain2. Material: ABS3.Size:approx. 43.7 x 30.5 x 5.3mm4. Response Frequency:125 KHz5. Chip Type: TK4100/EM41006. Erase Life: 100000 (times)7. Sensing Distance: 0-5 (cm)8. Read Time: 0.2 (MS)9. Operating Temperature: -40 ℃ - 85 ℃, waterproof10. Color: Mixed Color..

DescriptionAnalog-to-Digital Converter (ADC) Bit Rate: 16-bitInterface Type: I₂CChannels: 4 channels (AN0, AN1, AN2, AN3) or 2 differential inputsInput Voltage: 2.0-5.5 VChannel Input Voltage: 0-VDDContinuous Mode: 150 µA onlySingle-shot Mode: Automatic shutdownProgrammable Data Rate: 8-860 µs per ..

Description:100% brand new and high qualityMaterial: Electrical ComponentsColor: See picturesFeatures:You want to make a robot, When we saw this chip, we quickly realized what an excellent add-on this would be.Using only two pins, control 16 free-running PWM outputs!I2C input, control 16 PWM output..

This is a popular 16×2 LCD Display Blue/Green LED Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this LCD most micro-controllers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely fi..

This is a popular 16×2 LCD Display Blue/Green LED Backlight display. It is based on the HD 44870 display controller which makes it is easy to interface this LCD most micro-controllers. Its extreme popularity ensures that no matter which micro controller platform you are using, you will definitely fi..

TTL to RS485 485 to Serial UART Adapter Compatible with 3.3V and 5.0V power supply. Has RXD, TXD signal indicator light, monitor send and receive status. Support multi-machine communication, allowing access at up to 128 devices on the bus The module can be hot swapped, the signal does not ap..

3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield is an all-in-one design to fit the necessary components for a 3D printer into one plug in shield for an Arduino MEGA.The plug in shield design includes plug in stepper drivers and extruder control electronics sockets for easy service, part re..